Skip to content

Slicer integration

You can send a rendered design straight to your slicer by configuring the slicer as a local print service. After that, press F8 (or use File → 3D Print) to export and open the model in the slicer.

If the design has not been rendered with F6 since the last change, PythonSCAD offers to render it first (Render and Print) before sending it to the slicer. The same prompt applies to Export… (F7).

Setup

  1. Open Edit → Preferences (or PythonSCAD → Preferences on macOS) and go to the 3D Print tab.
  2. Enable remote print services and set the default print service to Local Application.
  3. Under Local Application, set the executable and parameters for your slicer.

The examples below configure PrusaSlicer. Other slicers work the same way: set the executable (on macOS the .app bundle; elsewhere the slicer binary) and pass the output file path as a parameter (use the File button to insert the placeholder).

Linux (Flatpak)

Executable:

/usr/bin/flatpak

Parameters (one per line):

  • run
  • com.prusa3d.PrusaSlicer
  • --single-instance
  • full path to the output file (use the File button)

Windows

Executable (default installer location):

C:\Program Files\Prusa3D\PrusaSlicer\prusa-slicer.exe

Parameters (one per line):

  • --single-instance
  • full path to the output file (use the File button)

If you installed PrusaSlicer elsewhere, browse to prusa-slicer.exe from the Preferences dialog instead of typing the path by hand.

macOS

On macOS, PythonSCAD launches the configured application with open -a, so the executable must be the application bundle (the .app), not the Mach-O binary inside Contents/MacOS/.

Executable:

/Applications/PrusaSlicer.app

Parameters (one per line):

  • --single-instance
  • full path to the output file (use the File button)

If PrusaSlicer lives elsewhere (for example /Applications/Original Prusa Drivers/PrusaSlicer.app), point the executable at that .app bundle instead.